Internal Blind Units

The Topslide Internal Glass Blind System is operated by a top mounted external magnet, which controls the blind by a moveable finger slide device. When the slide device moves to the left or right, it causes the blind slats to tilt. The innovative and unique design of the finger slide device provides both privacy and light control.



Topslide Blind with External Slide Operator

      


The moveable finger slide device makes adjusting the slats convenient and simple. Due to the blinds unique control of infrared energy and UV radiation, sun damage to fabrics, furniture and flooring ceases to exist.

Topslide Models and Specifications:

The 5/8" Topslide Blind requires a .625" internal glass airspace. The slat is aluminum alloy 6010-T8 and 12.5mm(.500") x .008". It is painted with a polyester ultraviolet high resistant finish. A .5/8" air gap is required for blind operation.

The 3/4" Topslide Blind requires a .750" internal glass airspace. The slat is aluminum alloy 6010-T8 and 15mm(.600") x .006". It is painted with a low emissive paint with a polyester ultraviolet high resistant finish. A 3/4" air gap is required for blind operation.
 

Spacer System Box or Intercept(5/8')
Max Glass Thickness 1/8 Inch
Min/Max Width 3/4" Topslide  7/49 Inches
5/8" Topslide 13/49 Inches
Min/Max Length 10/80 Inches
Operator Types Slide (see types)

 

Send mail to potter@orrcomputer.com with questions or comments about this web site.
Last modified: 05/20/09